How To Clean Dr Brown's Deluxe Bottle Warmer

Download Article

Download Commodity

If you lot have a Dr. Brown's bottle warmer, it may seem difficult to clean at first. However, the reservoir and warming basket are removable, and the basket is even dishwasher-prophylactic, as long as you put information technology on the top rack. You can clean the rest with soapy h2o and a sponge or cloth. Then, every 4 weeks, run diluted vinegar through the reservoir to remove limescale deposits, which tin prevent the warmer from working properly.

i
Unplug the appliance and allow it to cool before you clean it. Don't try to clean your Dr. Chocolate-brown's bottle warmer or remove the reservoir while the warmer is still plugged in. Also, if you lot've recently used the warmer, wait about 30 minutes after you unplug information technology to allow the water to cool to a safety temperature.^[1]
- As with any electrical apparatus, brand sure y'all follow all safety precautions.
- Since the warmer uses steam to heat the bottles, the water inside may be extremely hot right later on you use it.
2
Remove the h2o reservoir and fill it with soapy water. Await at the right side of the bottle warmer and observe the translucent water reservoir on the side. Pull up on it to remove information technology, then pour out any water that's inside. Fill the reservoir with warm, soapy water, and set it bated to soak for about 5 minutes.
- Lay the reservoir on a towel or prop information technology in your sink to keep the h2o from spilling.
- Use a mild lather for cleaning the bottle warmer. Do not use any harsh solvents on the apparatus, as you may damage it.
- For convenience, let the reservoir soak while you lot wipe down the appliance and wash the basket. That way, they can kickoff drying while you finish rinsing the reservoir later on it soaks.
Advertizement
3

Tilt the warmer to the side to empty the heating sleeping room. Hold the bottle warmer over your sink and open up the cover, so tip the warmer sideways so the reservoir chamber is facing upwards. If there's whatsoever water in the heating chamber, it should drain into your sink.^[ii]
4
Identify the basket on the top rack of the dishwasher or launder it by paw. The plastic piece that holds the canteen or infant food container in identify is machine washable, and so if you'd like, you can identify information technology on the superlative rack and wash information technology forth with the rest of your dishes. If you'd prefer, notwithstanding, y'all can wash information technology past manus with soapy water instead.^[3]
- If you place the handbasket on the bottom rack in a dishwasher, the force from the sprayer could cause the handbasket to become dislodged or damaged.
- Place the basket on a thick towel and permit it to air dry.
5
Wipe down the bottle warmer with a cloth or sponge dipped in soapy water. Dip a soft cleaning cloth or a non-abrasive sponge in warm water mixed with a few drops of mild dish lather and clasp out any backlog water. Then, gently wipe downward the outside of your Dr. Brown's bottle warmer, also as the inside of the heating chamber.^[4]
- Do non place the appliance underwater.
half-dozen
Empty the reservoir, then add a small corporeality of uncooked rice and water. After the reservoir has soaked for nearly 5 minutes, pour out all of the soapy water. So, cascade in about 2 tbsp (24 1000) of uncooked, non-instant rice, forth with i United states tbsp (xv mL) of water.
- The measurements of the rice and water don't have to be exact.
- The fill hole on the reservoir is small, so yous may demand to utilise a funnel, or y'all tin can make 1 yourself by rolling a piece of paper into a cone.
- Exercise not use cooked rice for this. It will get mushy and get stuck in the reservoir, which could lead to leaner and mold.
7
Shake the reservoir vigorously for about 15-30 seconds. Place ane finger over the make full hole on the reservoir and shake the container dorsum and forth firmly. Tilt the reservoir different ways as y'all milkshake to ensure the rice comes in contact with every part of the inside surface.
- The agitation from the rice and the water volition help break upwardly and remove whatsoever soapy residue on the inside of the reservoir.
- Although the water in the reservoir isn't used to make the bottle, if you don't clean the reservoir out thoroughly, the steam could leave soapy residuum on outside of the canteen, including the nipple.
8
Pour out the rice and rinse the reservoir well, repeating if you need to. Pour out and discard the rice and water that are inside the reservoir, and so flush the container out with running water several times. If y'all'd similar, you tin fill the reservoir nigh halfway with water, and so shake the container the aforementioned manner you did when it was filled with the rice.
- If you notice a lot of suds remaining in the reservoir, add together more rice and water and milkshake the container more vigorously earlier rinsing again.
- Milkshake every bit much water out of the reservoir as you tin can.
9
Air dry all of the parts, the//n put the warmer back together. Identify the reservoir on the towel with the basket and let them both dry out for at least an hour. The inside of the reservoir doesn't have to exist completely dry, since yous'll add more water to it anyway, but make certain the outside components are completely dry earlier you reassemble the warmer.^[5]
- Push the reservoir back into its slot on the right side of the warmer to reattach it. You can leave the basket out until you're set up to use information technology, or you can place it within the sleeping accommodation of the warmer, if you'd like.
- Clean your Dr. Brownish's bottle warmer well-nigh in one case a week or any time you lot notice an odor coming from the reservoir.
Advertisement

1
Descale your canteen warmer every iv weeks or if information technology isn't working. Over time, hard water can cause limescale buildup on the inside of your appliance. Running vinegar through the warmer will help break up that buildup, ensuring it can continue to work properly.
- Oftentimes, if the warmer stops working properly, it needs to exist descaled.
2

Unplug the apparatus and allow it to cool off. Exercise not attempt to clean the warmer while the ability is on, as it could increase your adventure of electric shock. Also, wait at least 30 minutes after using the warmer before y'all attempt to make clean information technology to ensure it'south not too hot.
3

Empty the heating chamber and reservoir. Remove the reservoir from the right side of the Dr. Chocolate-brown's canteen warmer and empty it. Then, tilt the warmer to the side so the reservoir chamber is facing upwards, and let all of the h2o drain out of the heating bedroom.
4
Cascade ii oz (50 ml) of white vinegar and 4 oz (100 ml) of cold water into the reservoir. Vinegar is a condom and all-natural cleaner, and its high acidity makes it very effective at removing scale. Measure out about 2 oz (50 ml) of vinegar and pour it into the reservoir, then add 4 oz of cold h2o. Milkshake the reservoir gently to combine the water and vinegar.
- If you don't have a spoon or a cup that measures in fl oz or ml, you can utilise a shot glass, which holds about two oz, to measure out the vinegar. Fill the shot glass twice for the h2o.
- You tin too mix the vinegar and water together ahead of time, if you'd prefer.
v
Plug in the warmer and run the mixture through until the reservoir is empty. Supersede the reservoir, then plug in the bottle warmer. Run it on a normal heating bike as many times as it takes to empty the reservoir.^[six]
- You may desire to run it on whatever wheel y'all normally use so you don't have to reprogram your settings. Nonetheless, if you'd adopt to turn it to a higher temperature to shorten the descaling procedure, that's fine.
vi
Unplug the warmer over again, remove the reservoir, and rinse information technology thoroughly. Rinse the reservoir several times to ensure in that location is no vinegar residue left inside. Allow the reservoir to air dry out for about an hour earlier yous return it to the warmer.
- Y'all tin also pat the outside with a paper towel, and then allow it air dry for about xv minutes.
vii
Fill the water reservoir and put it into place, checking for air bubbles. When your Dr. Brown'southward bottle warmer is working correctly, you should see 2-iii air bubbles coming from the lesser of the reservoir after y'all place it into the compartment. This happens when some of the water is released into the warmer, so that's a sign that all of the scale has been removed.
- If you don't encounter the bubbling, repeat the descaling process until y'all exercise.
Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizing

Video

If you notice that your Dr. Brown'due south bottle warmer has an unpleasant olfactory property, in that location may exist milk or formula in the heating chamber. Clean them both thoroughly. Then, the next fourth dimension you make a bottle, loosen the neckband and nipple about i/2 plough. This will help foreclose force per unit area from building upward inside the canteen, which can force out a pocket-size amount of milk inside the warmer.^[seven]

Thank you for submitting a tip for review!

Practice not apply anything abrasive or any harsh solvents to clean the Dr. Dark-brown's canteen warmer.^[8]
Unplug the warmer earlier you clean information technology.

Things You'll Demand

Mild dish soap
Soft cleaning cloth or sponge
Towel
two tbsp (24 k) rice
H2o
Funnel (optional)

Measuring loving cup or spoon (or shot drinking glass)
Vinegar
H2o
Paper towel (optional)

About This Commodity

Commodity Summary X

To clean a Dr. Dark-brown'southward bottle warmer, start by removing the reservoir and filling information technology with soapy water. Fix the reservoir aside and allow it soak for 5 minutes. While that'due south soaking, tilt the warmer to the side over a sink to drain any water inside of it. In one case all the water is out, wash the basket by hand or place information technology in the dishwasher. Then, use a damp, soapy cloth to wipe downwardly the outside of the warmer. When the reservoir is washed soaking, dump out the h2o and add 2 tablespoons of uncooked rice and 1 tablespoon of water. Milkshake the reservoir vigorously for 30 seconds, then empty it and rinse information technology thoroughly. Finally, let all of the parts air-dry, then reassemble the canteen warmer. To learn how to descale your Dr. Brown'south bottle warmer, go along reading!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 44,309 times.